View TSM221_341767.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TSM221
DUAL CMOS RAIL TO RAIL OPERATIONAL AMPLIFIER AND DUAL CMOS COMPARATOR
. . . . . . . . . . . . . .
SINGLE SUPPLY OPERATION FROM 2.7V TO 16V LOW SUPPLY CURRENT: 500A (VCC = 5V) LATCH - UP IMMUNITY OPERATIONAL AMPLIFIERS RAIL TO RAIL INPUT AND OUTPUT EXTREMELY LOW INPUT BIAS CURRENT : 1pA typ. 1MHz TYPICAL GAIN BANDWIDTH PRODUCT SPECIFIED FOR 600 OUTPUT LOAD COMPARATORS PUSH-PULL OUTPUT (no external pull-up resistor required) EXTREMELY LOW INPUT BIAS CURRENT : 1pA typ. EXTREMELY LOW INPUT OFFSET CURRENT : 1pA typ. INPUT COMMON-MODE VOLTAGE RANGE INCLUDES GROUND HIGH INPUT IMPEDANCE : 1012 typ. FAST RESPONSE TIME : 2s TYP. FOR 5mV OVERDRIVE SPICE MACROMODEL INCLUDED IN THIS SPECIFICATION
N DIP14 (Plastic Package)
D SO14 (Plastic Micropackage)
ORDER CODES
Part Number TSM221I Temperature Range -40, +125oC Package N * D *
PIN CONNECTIONS (top view)
Output 1 1 Inve rting Inp ut 1 2 Non-inve rting Inp ut 1 3
VCC + 4
14
Output 4 Inve rting Inp ut 4 Non-inve rting Inp ut 4 VCC Non-inve rting Inp ut 3 Inve rting Inp ut 3 Output 3
+
Op-amp1 Op-a mp2
+
13 12 11
DESCRIPTION The TSM221 is a space-saving monolithic IC which includes a dual Rail to Rail op-amp and a micropower dual comparator, using a CMOS process. This mixed circuit is a generalpurpose analogblock for Telecom or Industrial applications, offering an integrated high performances solution.
December 1997
Non-in ve rting Inp ut 2 Inve rting Inp ut 2 Output 2
5 6 7
+
+
C omp1 Comp2
10 9 8
-
-
1/11
TSM221
ABSOLUTE MAXIMUM RATINGS (OPERATIONAL AMPLIFIERS)
Symbol VCC Vid Vi Iin Io Toper Tstg Supply Voltage - (note 1) Differential Input Voltage - (note 2) Input Voltage - (note 3) Current on Inputs (Op-Amps) Current on Outputs (Op-Amps) Operating Free Air Temperature Range Storage Temperature Parameter Value 18 18 -0.3 to 18 50 130 -40 to +125 -65 to +125 Unit V V V mA mA
o o
C C
ABSOLUTE MAXIMUM RATINGS (COMPARATORS)
Symbol VCC Vid Vi VO Io Toper Tstg
Notes : 1. 2. 3. 4.
Parameter Supply Voltage - (note 1) Differential Input Voltage - (note 2) Input Voltage - (note 4) Output Voltage Output Current (Comparators) Operating Free Air Temperature Range Storage Temperature
Value 18 18 -0.3 to 18 18 20 -40 to +125 -65 to +125
Unit V V V V mA
o o
C C
All voltages values, except differential voltage are with respect to network ground terminal. Differential voltages are non-inverting input terminal with respect to the inverting input terminal. The magnitude of input and output voltages must never exceed (VCC+) +0.3V. The magnitude of input and output voltages must never exceed the magnitude of the positive supply voltage.
OPERATING CONDITIONS
Symbol VCC Vicm Vicm Supply Voltage Common Mode Input Voltage Range (Op-Amps) Common Mode Input Voltage Range (Comparators) Parameter Value 2.7 to 16 Vdd -0.2 to VCC +0.2 0 to VCC -1.5
+
Unit V V V
2/11
TSM221
OPERATIONAL AMPLIFIERS
ELECTRICAL CHARACTERISTICS VCC+ = 5V, VCC- = 0V, RL,CL connected to VCC/2, Tamb = 25oC (unless otherwise specified)
Symbol Vio DVio Iio Iib Avd ICC CMR SVR VOH Parameter Input Offset Voltage Input Offset Voltage Drift Input Offset Current - (note 1) Input Bias Current - (note 1) Large Signal Voltage Gain Total Supply Current- (note 2) Common Mode Rejection Ratio Supply Voltage Rejection Ratio High Level Output Voltage R1 connected to VCC/2 Low Level Output Voltage R1 connected to VCC/2 Output Short Circuit Current Output Sink Current Gain Bandwidth Product Slew Rate Phase Margin Equivalent Input Noise Voltage Channel Separation Rs = 100, f = 1kHz f = 1kHz Tmin. Tamb Tmax. Tmin. Tamb Tmax. R L = 10k, VO = 1.5V to 3.5V Tmin. Tamb Tmax. No load Vic = 1.5 to 3.5V, Vo = 2.5V VCC = 3V to 5V, VO = VCC /2 R L = 10k R L = 600 R L = 100 R L = 10k R L = 600 R L = 100 Vo = VCC Vo = VCC
+ +
Test Condition Tmin. Tamb Tmax.
Min.
Typ.
Max. 10 12
Unit mV V/oC
5 1 1 10 7 60 55 4.90 4.25 50 500 85 80 4.95 4.55 3.7 40 350 1400 45 45 65 65 1 100 500 800 100 200 150 300
pA pA V/mV A dB dB V
VOL
mV
Io Isink GBP SR m en Cs
mA mA MHz V/s
AVCL = 100, R L = 10k, C L = 100pF, f = 100kHz AVCL = 1, RL = 10k, C L = 100pF, Vi = 1V to 4V
0.7 30 30 120 Degrees nV Hz dB
Note 1 : Maximum values including unavoidable inaccuracies of the industrial test. Note 2 : Op-amps and comparators
3/11
TSM221
OPERATIONAL AMPLIFIERS
ELECTRICAL CHARACTERISTICS VCC+ = 3V, VCC- = 0V, RL,CL connected to VCC/2, Tamb = 25oC (unless otherwise specified)
Symbol Vio DVio Iio Iib Avd ICC CMR SVR VOH Parameter Input Offset Voltage Input Offset Voltage Drift Input Offset Current - (note 1) Input Bias Current - (note 1) Large Signal Voltage Gain Total Supply Current- (note 2) Common Mode Rejection Ratio Supply Voltage Rejection Ratio High Level Output Voltage R1 connected to VCC/2 Low Level Output Voltage R1 connected to VCC/2 Output Short Circuit Current Output Sink Current Gain Bandwidth Product Slew Rate Phase Margin Equivalent Input Noise Voltage Channel Separation Rs = 100, f = 1kHz f = 1kHz Tmin. Tamb Tmax. Tmin. Tamb Tmax. R L = 10k, VO = 1.5V to 3.5V Tmin. Tamb Tmax. No load Vic = 0 to 3V, Vo = 1.5V VCC = 2.7V to 3.3V, VO = VCC /2 R L = 10k R L = 600 R L = 100 R L = 10k R L = 600 R L = 100 Vo = VCCVo = VCC
+ +
Test Condition Tmin. Tamb Tmax.
Min.
Typ.
Max. 10 12
Unit mV V/oC
5 1 1 3 2 10 415 70 50 2.90 2.30 80 2.96 2.60 2 30 300 900 20 20 40 40 0.8 70 400 600 100 200 150 300
pA pA V/mV A dB dB V
VOL
mV
Io Isink GBP SR m en Cs
mA mA MHz V/s
AVCL = 100, R L = 10k, C L = 100pF, f = 100kHz AVCL = 1, RL = 10k, C L = 100pF, Vi = 1.3V to 1.7V
0.3 30 30 120 Degrees nV Hz dB
Note 1 : Maximum values including unavoidable inaccuracies of the industrial test. Note 2 : Op-amps and comparators
4/11
TSM221
MACROMODEL FOR OP-AMPS (VCC = 3V) Applies to : TSM221
** Standard Linear Ics Macromodels, 1993. ** CONNECTIONS : * 1 INVERTING INPUT * 2 NON-INVERTING INPUT * 3 OUTPUT * 4 POSITIV E POWER SUPPLY * 5 NEGATIVE POWER SUPPLY .SUBCKT TSM2213V 1 3 2 4 5 (analog) ************************************* ********************* .MODEL MDTH D IS=1E-8 KF=6.564344E-14 CJO=10F * INPUT STAGE CIP 2 5 1.000000E-12 CIN 1 5 1.000000E-12 EIP 10 5 2 5 1 EIN 16 5 1 5 1 RIP 10 11 6.500000E+00 RIN 15 16 6.500000E+00 RIS 11 15 1.271505E+01 DIP 11 12 MDTH 400E-12 DIN 15 14 MDTH 400E-12 VOFP 12 13 DC 0.000000E+00 VOFN 13 14 DC 0 IPOL 13 5 4.000000E-05 CPS 11 15 2.125860E-08 DINN 17 13 MDTH 400E-12 VIN 17 5 0.000000e+00 DINR 15 18 MDTH 400E-12 VIP 4 18 0.000000E+00 FCP 4 5 VOFP 5.000000E+00 FCN 5 4 VOFN 5.000000E+00 * AMPLIFYING STAGE FIP 5 19 VOFP 2.750000E+02 FIN 5 19 VOFN 2.750000E+02 RG1 19 5 1.916825E+05 RG2 19 4 1.916825E+05 CC 19 29 2.200000E-08 HZTP 30 29 VOFP 1.3E+03 HZTN 5 30 VOFN 1.3E+03 DOPM 19 22 MDTH 400E-12 DONM 21 19 MDTH 400E-12 HOPM 22 28 VOUT 3800 VIPM 28 4 150 HONM 21 27 VOUT 3800 VINM 5 27 150 EOUT 26 23 19 5 1 VOUT 23 5 0 ROUT 26 3 75 COUT 3 5 1.000000E-12 DOP 19 68 MDTH 400E-12 VOP 4 25 1.724 HSCP 68 25 VSCP1 0.8E8 DON 69 19 MDTH 400E-12 VON 24 5 1.7419107 HSCN 24 69 VSCN1 0.8E+08 VSCTHP 60 61 0.0875 ** VSCTHP = le seuil au dessus de vio * 500 ** c.a.d 275U-000U dus a l'offset DSCP1 61 63 MDTH 400E-12 VSCP1 63 64 0 ISCP 64 0 1.000000E-8 DSCP2 0 64 MDTH 400E-12 DSCN2 0 74 MDTH 400E-12 ISCN 74 0 1.000000E-8 VSCN1 73 74 0 DSCN1 71 73 MDTH 400E-12 VSCTHN 71 70 -0.55 ** VSCTHN = le seuil au dessous de vio * 2000 ** c.a.d -375U-000U dus a l'offset ESCP 60 0 2 1 500 ESCN 70 0 2 1 -2000 .ENDS
ELECTRICAL CHARACTERISTICS VCC+ = 3V, VCC- = 0V, RL,CL connected to VCC/2, Tamb = 25oC, unless otherwise specified
Symbol Vio Avd ICC Vicm VOH VOL Isink Isource GBP SR RL = 10k RL = 10k VO = 3V VO = 0V RL = 10k, CL = 100pF RL = 10k, CL = 100pF RL = 10k No load Conditions Value 0 10 415 -0.2 to 3.2 2.96 30 40 40 0.8 0.3 Unit mV V/mV A V V mV mA mA MHz V/s
5/11
TSM221
MACROMODEL FOR OP-AMPS (VCC = 5V) Applies to : TSM221
** Standard Linear Ics Macromodels, 1993. ** CONNECTIONS : * 1 INVERTING INPUT * 2 NON-INVERTING INPUT * 3 OUTPUT * 4 POSITIV E POWER SUPPLY * 5 NEGATIVE POWER SUPPLY * 6 STANDBY .SUBCKT TSM2215V 1 3 2 4 5 (analog) ************************************* ********************* .MODEL MDTH D IS=1E-8 KF=6.564344E-14 CJO=10F * INPUT STAGE CIP 2 5 1.000000E-12 CIN 1 5 1.000000E-12 EIP 10 5 2 5 1 EIN 16 5 1 5 1 RIP 10 11 6.500000E+00 RIN 15 16 6.500000E+00 RIS 11 15 7.322092E+00 DIP 11 12 MDTH 400E-12 DIN 15 14 MDTH 400E-12 VOFP 12 13 DC 0.000000E+00 VOFN 13 14 DC 0 IPOL 13 5 4.000000E-05 CPS 11 15 2.498970E-08 DINN 17 13 MDTH 400E-12 VIN 17 5 0.000000e+00 DINR 15 18 MDTH 400E-12 VIP 4 18 0.000000E+00 FCP 4 5 VOFP 5.750000E+00 FCN 5 4 VOFN 5.750000E+00 ISTB0 5 4 500N * AMPLIFYING STAGE FIP 5 19 VOFP 4.400000E+02 FIN 5 19 VOFN 4.400000E+02 RG1 19 5 4.904961E+05 RG2 19 4 4.904961E+05 CC 19 29 2.200000E-08 HZTP 30 29 VOFP 1.8E+03 HZTN 5 30 VOFN 1.8E+03 DOPM 19 22 MDTH 400E-12 DONM 21 19 MDTH 400E-12 HOPM 22 28 VOUT 3800 VIPM 28 4 230 HONM 21 27 VOUT 3800 VINM 5 27 230 EOUT 26 23 19 5 1 VOUT 23 5 0 ROUT 26 3 82 COUT 3 5 1.000000E-12 DOP 19 68 MDTH 400E-12 VOP 4 25 1.724 HSCP 68 25 VSCP1 0.8E+08 DON 69 19 MDTH 400E-12 VON 24 5 1.7419107 HSCN 24 69 VSCN1 0.8E+08 VSCTHP 60 61 0.0875 ** VSCTHP = le seuil au dessus de vio * 500 ** c.a.d 275U-000U dus a l'offset DSCP1 61 63 MDTH 400E-12 VSCP1 63 64 0 ISCP 64 0 1.000000E-8 DSCP2 0 64 MDTH 400E-12 DSCN2 0 74 MDTH 400E-12 ISCN 74 0 1.000000E-8 VSCN1 73 74 0 DSCN1 71 73 MDTH 400E-12 VSCTHN 71 70 -0.55 ** VSCTHN = le seuil au dessous de vio * 2000 ** c.a.d -375U-000U dus a l'offset ESCP 60 0 2 1 500 ESCN 70 0 2 1 -2000 .ENDS
ELECTRICAL CHARACTERISTICS VCC+ = 5V, VCC- = 0V, RL,CL connected to VCC/2, Tamb = 25oC, unless otherwise specified
Symbol Vio Avd ICC Vicm VOH VOL Isink Isource GBP SR RL = 10k RL = 10k VO = 5V VO = 0V RL = 10k, CL = 100pF RL = 10k, CL = 100pF RL = 10k No load Conditions Value 0 50 500 -0.2 to 5.2 4.95 40 65 65 1 0.7 Unit mV V/mV A V V mV mA mA MHz V/s
6/11
TSM221
COMPARATORS
ELECTRICAL CHARACTERISTICS VCC+ = 5V, VCC- = 0V, Tamb = 25oC (unless otherwise specified)
Symbol Vio Iio Iib VOH VOL Vicm CMR SVR Tplh Parameter Input Offset Voltage - (note 1) Tmin. Tamb Tmax. Input Offset Current - (note 2) Tmin. Tamb Tmax. Input Bias Current - (note 2) Tmin. Tamb Tmax. High Level Output Voltage Tmin. Tamb Tmax. Low Level Output Voltage Tmin. Tamb Tmax. Input Common Mode Voltage Tmin. Tamb Tmax. Common Mode Rejection Ratio Supply Voltage Rejection Ratio Response Time Low to High Overdrive = 5mV Overdrive = 10mV Overdrive = 20mV Overdrive = 40mV TTL input Response Time High to Low Overdrive = 5mV Overdrive = 10mV Overdrive = 20mV Overdrive = 40mV TTL input Fall Time Rise Time Vic = Vicm min. VCC = 5V to 10V Vic = 0V, f = 10kHz, CL = 50pF 1.5 1.1 0.9 0.7 0.6 2.2 1.6 1.1 0.75 0.17 30 30
+
Test Condition Vic = Vicm min. VCC+ = 5V to 10V
Min.
Typ.
Max. 5 6.5
Unit mV pA
1 300 1 600 Vid = 1V, Ioh = -4mA Vid = -1V, Ioh = 4mA 0 to VCC -1.2 0 to VCC+ -1.5 82 90
+
pA V 300 375 mV
4.5 4.3
4.7 220
dB dB s
Tph1
Vic = 0V, f = 10kHz, CL = 50pF
s
Tf TR
f = 10kHz, CL = 50pF, overdrive 50mV f = 10kHz, CL = 50pF, overdrive 50mV
ns ns
Note 1 : The specified offset voltage is the maximum value required to drive the output up to 4.5V or down to 0.3V. Note 2 : Maximum values including unavoidable inaccuracies of the industrial test.
7/11
TSM221
COMPARATORS
ELECTRICAL CHARACTERISTICS VCC+ = 3V, VCC- = 0V, Tamb = 25oC (unless otherwise specified)
Symbol Vio Iio Iib VOH VOL Vicm CMR SVR Tplh Parameter Input Offset Voltage - (note 1) Tmin. Tamb Tmax. Input Offset Current - (note 2) Tmin. Tamb Tmax. Input Bias Current - (note 2) Tmin. Tamb Tmax. High Level Output Voltage Tmin. Tamb Tmax. Low Level Output Voltage Tmin. Tamb Tmax. Input Common Mode Voltage Tmin. Tamb Tmax. Common Mode Rejection Ratio Supply Voltage Rejection Ratio Response Time Low to High Overdrive = 5mV TTL input Response Time High to Low Overdrive = 5mV TTL input Fall Time Rise Time Vic = Vicm min. VCC = 5V to 10V Vic = 0V, f = 10kHz, CL = 50pF Vic = 0V, f = 10kHz, CL = 50pF f = 10kHz, CL = 50pF, overdrive 50mV f = 10kHz, CL = 50pF, overdrive 50mV 1.5 0.7 2.2 0.15 30 30 ns ns
+
Test Condition Vic = 1.5V
Min.
Typ.
Max. 5 6.5
Unit mV pA
1 300 1 600 Vid = 1V, Ioh = -4mA Vid = -1V, Ioh = 4mA 0 to VCC -1.2 0 to VCC+ -1.5 80 75
+
pA V 400 450 mV
2 1.8
2.4 300
dB dB s s
Tphl
Tf TR
Note 1 : The specified offset voltage is the maximum value required to drive the output up to 4.5V or down to 0.3V. Note 2 : Maximum values including unavoidable inaccuracies of the industrial test.
8/11
TSM221
MACROMODEL FOR COMPARTORS (VCC = 3V) Applies to : TSM221
** Standard Linear Ics Macromodels, 1993. ** CONNECTIONS : * 1 INVERTING INPUT * 2 NON-INVERTING INPUT * 3 OUTPUT * 4 POSITIV E POWER SUPPLY * 5 NEGATIVE POWER SUPPLY .SUBCKT TSM221C 1 3 2 4 5 ************************************ ********************** ************************* RVAR ************************* .SUBCKT RVAR 20 10 IN OUT VSENS0 IN 1 0V R0 1 OUT 125 F0 1 OUT POLY(2) VSENS0 VSENS2 0 0 0 0 1E+08 VSENS2 20 3 0V R2 3 10 1E+09 .ENDS RVAR *********************** COMPARATOR ********************* .MODEL MDTH D IS=1E-11 KF=1.050321E-32 CJO=10F * INPUT STAGE CIP 2 5 1.000000E-12 CIN 1 5 1.000000E-12 EIP 10 0 2 0 1 EIN 16 0 1 0 1 RIP 10 11 6.500000E+01 RIN 15 16 6.500000E+01 RIS 11 15 1.939046E+02 DIP 11 12 MDTH 400E-12 DIN 15 14 MDTH 400E-12 VOFP 12 13 DC 0.000000E+00 VOFN 13 14 DC 0 IPOL 13 0 100E-06 CPS 11 15 8.16E-09 DINN 17 13 MDTH 400E-12 VIN 17 5 0.000000e+00 DINR 15 18 MDTH 400E-12 VIP 4 18 1.200000E+00 FCP 4 5 VOFP 0.02 FCN 5 4 VOFN 0.02 FIBP 2 0 VOFN 2.000000E-08 FIBN 0 1 VOFP 2.000000E-08 * AMPLIFYING STAGE RG1 5 19 2.8E+05 RG2 4 19 2.8E+05 DOPM 19 22 MDTH 400E-12 DONM 21 19 MDTH 400E-12 HOPM 22 28 VOUT 3000 VIPM0 28 40 -87 EIPM 40 4 4 5 42 **VIPM 28 4 150 HONM 21 27 VOUT 3000 VINM0 50 27 -114 EINM 5 50 4 5 54 **VINM 5 27 150 DOP 19 25 MDTH 400E-12 VOP 4 25 1.097 DON 24 19 MDTH 400E-12 VON 24 5 1.097 FIP 0 19 VOFP 104 FIN 0 19 VOFN 104 EOUT 26 23 19 5 1 VOUT 23 5 0V XOUT 4 5 26 3 RVAR *ROUT 26 3 62.5 .ENDS
ELECTRICAL CHARACTERISTICS VCC+ = 3V, VCC- = 0V, Tamb = 25oC, unless otherwise specified
Symbol Vio ICC Vicm VOH VOL tPLH tPHL Vid = 1V, IOH = -4mA Vid = 1V, IOH = -4mA Overdrive = 5mV Overdrive = 5mV Vic = 1.5V No load, per operator Conditions Value 0 7 0 to 1.8V 2.4 300 1.5 2.2 Unit mV A V V mV s s
9/11
TSM221
PACKAGE MECHANICAL DATA 14 PINS - PLASTIC DIP
Dim. a1 B b b1 D E e e3 F i L Z
Millimeters Min. 0.51 1.39 0.5 0.25 20 8.5 2.54 15.24 7.1 5.1 3.3 1.27 2.54 0.050 1.65 Typ. Max. Min. 0.020 0.055
Inches Typ. Max. 0.065 0.020 0.010 0.787 0.335 0.100 0.600 0.280 0.201 0.130 0.100
10/11
TSM221
PACKAGE MECHANICAL DATA 14 PINS - PLASTIC MICROPACKAGE (SO)
Dim. A a1 a2 b b1 C c1 D E e e3 F G L M S
Min. 0.1 0.35 0.19
Millimeters Typ.
Max. 1.75 0.2 1.6 0.46 0.25 45o (typ.)
Min. 0.004 0.014 0.007
Inches Typ.
Max. 0.069 0.008 0.063 0.018 0.010
0.5 8.55 5.8 1.27 7.62 3.8 4.6 0.5 4.0 5.3 1.27 0.68 8 (max.)
o
0.020 8.75 6.2 0.336 0.228 0.050 0.300 0.150 0.181 0.020 0.157 0.208 0.050 0.027 0.334 0.244
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectronics.
ORDER CODE :
(c) 1997 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserved SGS-THOM SON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.
11/11

▲Up To Search▲

Price & Availability of TSM221

	To Download TSM221 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .